# Brixton Metals Drills 5,015 g/t Silver over 20m at Langis Source Brief: https://evesgoldminers.com/research/source-briefs/brixton-metals-corporation-2026-07-21-brixton-metals-drills-5-015-g-t-silver-over-7328b289 Original source: https://brixtonmetals.com/wp-content/uploads/2026/07/NR-21July2026-Final.pdf Original published: 2026-07-21 EGM generated: 2026-09-04 Company: Brixton Metals Corporation (BBB) ## Use Note This is the Eve's Gold Miners normalized Markdown copy of an official or regulatory public source. It is provided for readability, search discovery, and research resilience. The original source remains authoritative for legal, regulatory, and investment decisions. ## Extracted Document Text # Brixton Metals Drills 5,015 g/t Silver over 20m at Langis Source: https://brixtonmetals.com/wp-content/uploads/2026/07/NR-21July2026-Final.pdf Published: 2026-07-21T00:00:00+00:00 Fetched: 2026-08-02T19:59:08.808+00:00 Source artifact: 7328b289-9701-46dc-91ac-7a809fdf0042 Normalizer input: text ## Content # Brixton Metals Drills 5,015 g/t Silver over 20m at Langis Source: https://brixtonmetals.com/wp-content/uploads/2026/07/NR-21July2026-Final.pdf Published: 2026-07-21 Brixton Metals Drills 5,015 g/t Silver over 20m in a New Brownfields Discovery Area at Its Langis Project Included in hole 377 are several ultra-high-grade sub-intervals: 14.00m of 7,150 g/t silver, 1.15m of 74,137 g/t silver and 0.65m of 89,125 g/t silver VANCOUVER, British Columbia, July 21, 2026 (GLOBE NEWSWIRE) - Brixton Metals Corporation (TSX-V: BBB, OTCQX: BBBXF) (the “Company” or “Brixton”) is pleased to report the discovery of ultra-high-grade silver in a new brownfields area called the Shaft 6 Southeast area (S6- SE) at its wholly owned Langis Silver Project, located in the historic silver mining camp of Cobalt, Ontario, Canada. These results come from the Company’s 2026 drill campaign, its largest drill program to date, which is targeting both infill and expansion of established high-grade silver zones, with a total of 24,016.90m completed across 105 drill holes so far this year. In parallel, the Company is progressing toward a maiden Mineral Resource Estimate (MRE) on the historic tailings; 261.35m of drilling have been completed, and samples have been shipped to the laboratory for assaying. Highlights • In the S6-SE area, hole LM-26-377 yielded 20.00m of 5,015 g/t silver from 165.00m depth o Including 14.00m of 7,150 g/t silver o Including 1.15m of 74,137 g/t silver o Including 0.65m of 89,125 g/t silver • In the S6-SE area, hole LM-26-353 returned 13.00m of 287.8 g/t silver from 144.00m depth o Including 2.15m of 1,634 g/t silver o Including 0.55m of 4,320 g/t silver • In the S6-SE area, hole LM-26-352 intersected 7.00m of 275.0 g/t silver from 148.00m depth o Including 0.50m of 2,620 g/t silver Chairman and CEO, Gary R. Thompson stated, “We are super excited to have drilled more ultra- high-grade silver at Langis, especially in the Shaft 6 Southeast (S6-SE) area where no underground workings exist, effectively a new brownfields discovery. As far as we can find in publicly available data, hole 377 represents one of the highest reported silver intercepts globally. Hole 377 is located approximately 140m east of the previously reported hole 290 (Shaft 6 South), see Figure 1 below, which yielded 11.35m grading 4,560 g/t silver. Further drilling is ongoing in the S6-SE area, including between the two ultra-high-grade intercepts in holes 377 and 290 and what appears to be a south- east mineralized trend. We have a lot more holes that we plan to drill at Langis.” Figure 1. Cross-section of the Langis Shaft 6 area, looking northwest, showing silver grades and selected core photos from hole LM-26-377 / LM-26-290. (Cross-section trace shown in Figure 8). This cross-section displays only drill-hole segments located 20m from the section. Lithological contacts are interpretive. Historic drillhole assays are projected to a maximum of 20m from the section. Hole LM-26-290 was previously reported. Figure 2. Photographs of hole LM-26-377 at 171.95m depth showing native silver. Figure 3. Photographs of hole LM-26-377 at 172.20m showing native silver (split-half core). Figure 4. Photographs of hole LM-26-377 at 172.45m and 172.95m with abundant native silver. Figure 5. Photographs of hole LM-26-377 at 172.60m with abundant native silver. Figure 6. NQ core photograph of Hole LM-26-377 from 165.60m to 182.20m, showing silver grades: 14.00m grading 7,150 g/t silver, 1.15m grading 74,137 g/t silver, and 0.65m grading 89,125 g/t silver. Discussion Hole LM-26-377, drilled in the Shaft 6 Southeast (S6-SE) area, returned 0.65m grading 89,125 g/t silver within 20.00m grading 5,015 g/t silver and is located approximately 140m east of previously reported hole LM-26-290, which returned 0.50m of 82,334 g/t silver within 11.35m grading 4,560 g/t silver (Figure 1). The S6-SE area has no known historic underground workings and has never been mined; these results support the presence of ultra-high-grade silver in this new discovery area. Silver mineralization at S6-SE has now been outlined over at least 100m along strike and remains open along strike, down-plunge, and laterally. Brixton’s 2026 exploration around the historic Shaft 6 area at Langis has outlined at least two zones of silver mineralization, Shaft 6 South (S6-S) and Shaft 6 Southeast (S6-SE), both of which have now returned ultra-high-grade silver (Figure 1). This news release presents results from both areas, as well as from Shaft 6 North (S6-N) (Figure 7). Earlier drilling in the S6-SE area returned encouraging results, outlining continuous silver mineralization across several holes (refer to News Release, May 11, 2026), with silver occurring in both vein and disseminated styles. Hole LM-26-377 now confirms the potential for ultra-high-grade silver in this area, returning 0.65m grading 89,125 g/t silver within 20.00m grading 5,015 g/t silver (Table 1). These two ultra-high-grade results are separated by approximately 140m. Strong grades in S6-SE are not limited to a single hole; hole LM-26-353 intersected 0.55m of 4,320 g/t silver within 13.00m of 287.8 g/t silver (Table 2). The ultra-high-grade intercept in hole 377 establishes clear similarities with the S6-S area, where ultra-high-grade silver mineralization was reported earlier in this year’s program (refer to News Release, March 25, 2026). A key difference, however, is mining history: unlike portions of S6-S that are impacted by historic mine workings, S6-SE has limited workings and no known historic stopes. The two areas also share the same mineralization styles. In the Cobalt Camp and within the Langis property, silver has mostly been observed in veins; however, disseminated silver mineralization has also been observed in both the S6-S and S6-SE areas. The combination of high- and ultra-high- grade silver veins with disseminated silver is encouraging for the exploration program, as it extends mineralization beyond the veins. In both areas, silver mineralization is primarily hosted along the unconformity between the Keewatin Basalts and the Huronian Sediments, and is also observed within the Keewatin Basalts and the Nipissing Diabase (Figure 1). In parallel with extending the known mineralized zones, Brixton is actively drilling other prospective targets. Although results from the Shaft 6 North area are not economically mineralized, several intercepts with anomalous silver show that silver mineralization continues north of the historic Shaft 6 (Table 3). Follow-up drilling is advancing on three fronts. In the S6-S and S6-SE zones, drilling is stepping out along strike to test the continuity of the high-grade silver intervals and refine structural controls, and will also target a potential connection between the two zones. In parallel, exploratory drilling continues to test prospective targets across the property to outline new zones of mineralization. Finally, 261.35m of drilling have been completed in the Langis tailings areas and samples have been shipped to the laboratory for assaying and metallurgical testing and these results shall be released as they become available. Figure 7. Detailed map of the Shaft 6 area showing the drill hole traces reported in this news release, historic stopes projected to the surface, and the tailings outline. Figure 8. Detailed map of the Shaft 6 area showing the drill holes reported in this news release, historic stopes projected to surface, and the A to A’ cross-section trace (cross-section shown in Figure 1). Table 1. Selected assay intervals from drill holes in the Shaft 6 Southeast (S6-SE) zone reported in this news release. Hole ID From To Interval Silver Zone meter meter meter g/t LM-26-377 165.00 185.00 20.00 5,015.16 including 169.00 183.00 14.00 7,150.40 S6-SE and including 172.10 173.25 1.15 74,136.74 and including 172.10 172.75 0.65 89,125.00 All assay values are weighted averages. Reported intervals are drilling lengths, and the true widths of the mineralized intervals have not yet been determined. Reported intervals are length-weighted composites calculated at a 5 g/t Ag cut-off over contiguous samples, with limited internal dilution. A hole is reported as a significant intercept only where it contains a sub-interval exceeding 50 g/t Ag; otherwise, it is shown as "No significant intercepts." Higher-grade "including" intervals reflect geological interpretation. Table 2. Selected assay intervals from drill holes in the Shaft 6 South (S6-S) and Shaft 6 Southeast (S6-SE) zones reported in this news release. Hole ID From To Interval Silver Zone meter meter meter g/t LM-26-339 105.00 108.70 3.70 47.96 including 105.00 105.70 0.70 99.00 S6-S and including 106.70 107.70 1.00 98.00 LM-26-340 99.00 113.50 14.50 56.10 including 103.50 104.50 1.00 498.00 S6-S and including 112.50 113.50 1.00 175.00 LM-26-344 105.80 119.90 14.10 75.47 including 108.80 113.80 5.00 124.50 S6-S and including 111.80 112.80 1.00 232.00 LM-26-352 148.00 155.00 7.00 274.95 including 151.25 151.75 0.50 2,620.00 S6-SE LM-26-352 178.00 183.70 5.70 196.08 including 178.00 180.90 2.90 372.93 LM-26-353 126.00 130.05 4.05 216.46 including 127.00 128.00 1.00 819.00 LM-26-353 144.00 157.00 13.00 287.80 S6-SE including 153.00 155.15 2.15 1,633.93 and including 154.10 154.65 0.55 4,320.00 LM-26-356 No significant intercepts S6-SE LM-26-363 134.00 140.00 6.00 188.59 S6-SE LM-26-363 152.20 152.70 0.50 55.80 LM-26-365 154.00 162.00 8.00 67.93 including 155.90 158.60 2.70 188.19 and including 155.90 156.60 0.70 475.00 S6-SE LM-26-365 192.75 200.00 7.25 75.46 including 194.00 196.00 2.00 249.91 LM-26-367 No significant intercepts S6-SE LM-26-369 No significant intercepts S6-SE LM-26-373 No significant intercepts S6-SE All assay values are weighted averages. Reported intervals are drilling lengths, and the true widths of the mineralized intervals have not yet been determined. Reported intervals are length-weighted composites calculated at a 5 g/t Ag cut-off over contiguous samples, with limited internal dilution. A hole is reported as a significant intercept only where it contains a sub-interval exceeding 50 g/t Ag; otherwise, it is shown as "No significant intercepts." Higher-grade "including" intervals reflect geological interpretation. Table 3. Selected assay intervals from drill holes in the Shaft 6 North (S6-N) zone reported in this news release. Hole ID From To Interval Silver Zone meter meter meter g/t LM-26-357 205.50 206.75 1.25 9.79 LM-26-358 209.30 211.00 1.70 12.67 LM-26-359 to No significant intercepts LM-26-362 LM-26-364 No significant intercepts LM-26-366 No significant intercepts LM-26-368 200.80 204.80 4.00 18.93 S6-N LM-26-370 130.70 134.55 3.85 9.77 LM-26-372 135.25 140.60 5.35 30.36 including 136.50 137.50 1.00 81.60 LM-26-372 152.60 154.30 1.70 15.40 LM-26-376 No significant intercepts LM-26-380 No significant intercepts All assay values are weighted averages. Reported intervals are drilling lengths, and the true widths of the mineralized intervals have not yet been determined. Reported intervals are length-weighted composites calculated at a 5 g/t Ag cut-off over contiguous samples, with limited internal dilution. A hole is reported as a significant intercept only where it contains a sub-interval exceeding 10 g/t Ag; otherwise, it is shown as "No significant intercepts." Anomalous-grade "including" intervals reflect geological interpretation. Figure 9. Drill results from the Langis Shaft 6 area, highlights from the 2026 campaign to date. Table 4. Drill hole collar information for reported holes. Easting Northing Elevation Depth Hole ID Pad ID Azimuth Dip (m) (m) (m) (m) LM-26-339 LM-202 [Excerpt trimmed for readability. Open the original source for the complete filing or document.]